LED Controllers
Zigbee LED controllers for CV RGB+CCT and CCT LED strips. Full colour and tunable white control via Home Assistant.
Zigbee LED controllers for CV RGB+CCT and CCT LED strips. Full colour and tunable white control via Home Assistant.
Products in this category
LED Controller (CV-RGB+CCT)
Every colour. Every white. One controller. — ₹9,247
LED Controller (CC-CCT)
Warm in the evening. Crisp in the morning. — ₹8,247
Wiring
CV RGB+CCT Controller
- R, G, B → respective colour channels of your LED strip
- WW, CW → warm white and cool white channels
- 12V / 24V → match your strip's voltage
- Maximum load: check product specifications per channel
CV CCT Controller
- WW, CW → warm and cool white channels
- Enables smooth colour temperature tuning from warm to cool white
Setup
- Wire the controller per the diagram above.
- Connect to power.
- Pair with your Zigbee coordinator.
- In Home Assistant, the light entity will expose colour temperature and brightness controls.
Tips
- Use a power supply rated at ≥1.2× the total LED strip wattage.
- Run separate power supplies for runs longer than 5m to avoid voltage drop.
IR Blaster w/ Analog Screen, Temp & Humidity Sensor (WiFi)
A Wi-Fi IR blaster with integrated temperature and humidity sensors and an analog-style display. Transmits IR commands to legacy devices while simultaneously reporting real-time environmental data for automation logic.
LED Controller (CV-RGB+CCT)
A constant voltage LED controller for RGB+CCT LED strips, providing independent control over color (RGB), white temperature (CCT), and brightness across 5 output channels.