LED Controller (CV-DIMMER)
A constant voltage LED dimmer controller for single-color low-voltage LED strips, providing smooth 0-100% brightness control through a compatible smart ecosystem.
.3eec3ea1.png)
Protocol: Compatible smart ecosystem · Type: Constant Voltage LED Dimmer Controller · SRP: ₹8,247
Works with: Amazon Alexa · Google Home · Siri / Apple HomeKit
Description
A constant voltage LED dimmer controller for single-color low-voltage LED strips, providing smooth 0-100% brightness control through a compatible smart ecosystem.
Requires an appropriate constant voltage DC power supply (12V or 24V) matched to the LED strip specification. Designed for panel or concealed installation.
Specifications
| Specification | Value |
|---|---|
| Channels | 1 |
| Recommended Load | Single-color CV LED strips (12V or 24V) |
| Installation | Indoor panel or concealed installation |
| Compatibility | Compatible smart lighting ecosystems |
Installation
Requirements
- Existing wall switch in a flush box (≥ 60mm depth recommended)
- Live, Neutral, and Load wires in the flush box
- Zigbee coordinator within range
Turn off the circuit breaker for the affected circuit.
Remove the existing switch plate. The retrofit module sits behind the existing switch — no visible hardware change.
Connect wiring:
- Live → L input
- Neutral → N input
- Load → load output(s)
Fit the module into the flush box. Use DIN rail adapters for panel board installation.
Replace the switch plate.
Restore power. The device will blink — ready to pair.
Pair with your Zigbee coordinator.
Load Limits
- Standard relay: up to 4A direct. For 4–10A, use an external relay/SSR/contactor.
- 40A relay: rated for direct high-current switching. Proper cable sizing and circuit protection mandatory.
- Dimmer modules: resistive and leading-edge dimmable loads only. Not suitable for ceiling fans.
Shutter Module
The shutter module controls motorised curtains, blinds, and shutters:
- M1, M2 → motor up/down terminals
- Configure travel time in your coordinator for accurate position reporting.
Ordering
| SRP (incl. GST) | ₹8,247 |
| GST Rate | 18% |
| HSN Code | 85371010 |
Analog 0-10V Zigbee Dimmer
A single-channel Zigbee 0-10V analog dimming controller designed to integrate with LED drivers and lighting systems that accept a 0-10V dimming input signal.
TAC SH
A 3-button Zigbee shutter and curtain control switch with dedicated Open, Close, and Stop functions for AC motorized blinds and curtains up to 150W.