TAC Smart Switches

In-wall Zigbee smart switches in the TAC series. Single, double, triple, quad, heavy-load, fan speed, scene switch, and curtain variants. Compatible with standard Indian flush boxes.

Products in this category

TAC 1

One touch. The right response. — ₹17,500

TAC 2

Two circuits. One switch. — ₹17,750

TAC 3

Three loads. One clean face. — ₹19,500

TAC 4

Four circuits. Seamless control. — ₹20,000

TAC 6

Six scenes. One wall. — ₹21,250

TAC HL

Your geyser. On your schedule. — ₹18,000

TAC 6+

Load control and scenes. One switch. — ₹21,250

TAC SS

Any wall. Any location. No wiring. — ₹21,250

TAC S

A socket that fits the system. — ₹15,250

TAC F

Your fan. Fully in control. — ₹6,250

TAC K

Turn to dim. Push to switch. That's it. — ₹34,000

4 Gang Scene Switch

Four buttons. Twelve possibilities. Zero wiring. — ₹8,747

Installation

Requirements

Standard 2-module or 4-module flush box
Live, Neutral, and Load wires available at the switch location
Zigbee coordinator (gateway) within range

Turn off the circuit breaker for the circuit you're working on.

Remove the existing switch plate and pull out the wires.

Connect Live (L) → L terminal, Neutral (N) → N terminal, Load → the load terminal(s).

Tuck the module into the flush box and fit the TAC switch plate.

Restore power. The LED indicator will blink — the device is ready to pair.

Open your Zigbee coordinator app (Home Assistant, SmartThings, etc.) and put it in pairing mode.

Press and hold the switch for 5 seconds until the LED blinks rapidly — pairing begins.

Wiring Notes

Neutral wire is required for all TAC switches.
Maximum load per channel: see product specifications.
For ceiling fans, use the TAC F (fan speed controller variant).